650cc FIC Fuel Injector Clinic Injector Set for LS1 engines (High-Z)
LS1 Fuel Injector Clinic Injector Set: 8 x 650 cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTUSC8 or add Plug & Play adaptors PADPUtoJ8.
Plug and Play GM ECU Data Available at http://fuelinjectorclinic.com/GMData
Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicles OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
|WHP on Gas at 43.5psi 90%DC Turbo||631|
|WHP on Gas at 58psi 90%DC Turbo||729.3|
|WHP on E85 at 43.5psi 90%DC Turbo||486|
|WHP on E85 at 58psi 90%DC Turbo||561|
|WHP on Gas at 43.5psi 90%DC NA||758|
|WHP on Gas at 58psi 90%DC NA||875|
|WHP on E85 at 43.5psi 90%DC NA||583|
|Fuel Pressure (psi)||58|
|Engine aspiration||naturally aspirated|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: