0

1440cc FIC Nissan 240SX 11mm Setup Injector Set (High-Z)

  • Availability: In Stock
  • Product Code: IS181-1440H
  • Product viewed: 3931
Nissan 240SX 11mm Fuel Injector Clinic Injector Set: 4 x 1440cc Saturated / High Impedance Ball & Seat Injectors. Largest high impedance injector ever! Latest injector technology. Great linearity and short pulse width repeatability. Includes solder in pigtails.

Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

Fuel Injector ClinicÂ’s 1440cc/min high impedance injector fits nicely between our 1200 and 1650cc injectors. The 1440cc injector is compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.

The 1440cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!

Fitment Specifications
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 4
Height 64mm
Impedance High-Z
Top O-ring 11mm
Horsepower supported
Engine Aspiration turbocharged
Fuel Pressure 43.5
WHP on E85 at 43psi 90%DC NA 645.63
WHP on E85 at 43psi 90%DC Supercharged 586.93
WHP on E85 at 43psi 90%DC Turbo 538.02
WHP on E85 at 58psi 90%DC NA 745.70
WHP on E85 at 58psi 90%DC Supercharged 677.91
WHP on E85 at 58psi 90%DC Turbo 621.42
WHP on Gas at 43psi 90%DC NA 839.31
WHP on Gas at 43psi 90%DC Supercharged 763.01
WHP on Gas at 43psi 90%DC Turbo 699.43
WHP on Gas at 58psi 90%DC NA 969.41
WHP on Gas at 58psi 90%DC Supercharged 881.28
WHP on Gas at 58psi 90%DC Turbo 807.84

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha