Download SCT / Ford Data for our 2150cc/min Injector
Click above for data
Thanks for choosing Fuel Injector Clinic injectors for your Ford vehicle!
We have spent many hours to convert our standard injector offset and flow data provided with every set into SCT/ Ford OEM format for your ease of use, so we hope that it makes our injectors a popular choice for you and your customers if you are a tuner or performance shop!
Fuel Injector Clinic’s customized injector data for the Ford ECU is available for download using the link to the right.
There are a few notes that we would like to highlight when using these tables.
1. You need to make sure you choose the correct table for the size of injector that you are using. i.e. 850cc, 1000cc, 2150cc, etc. * See note below on our injector flow sizes
2. We would like to point out to you that the order of the data has been customized for SCT software, which is one of the most popular, but it can be rearranged as needed within excel if your software requires a different order. Please ask us if you have any questions in this regard.
3. Please realize that the values in the tables are carefully chosen from data for a median set. What that means is that we will have tested a large group of injectors (usually 50 or more) and then picked a set in the middle of that group, then tested that complete set through the range of pressures and voltages listed in the OE GM tables and then populated the attached tables based on the average values of that median set of injectors.
Important for you to note is that the values in the attached tables are averages, and that the set you receive may need small adjustments to correct the values for your particular set.
*Please note that all our listed injector flow sizes are rated at 43.5psi (3 bar) so that you always know which injector flows more than another, across all brands of cars, some of which run 43.5psi OE fuel pressure, others, like many of the more recent Ford cars, run 58psi (4 bar) fuel pressures – e.g. Our 1100cc/min or 105lb/hr is rated at 43.5psi, which would equate to 1270cc/min or 121 lb/hr at 58psi.
All values listed in the tables attached assume you are running the OE Ford system where the ECU reads and adjusts for the fuel pressure in your car. You are NOT required to adjust any of the provided data because of our policy to list flow sizes at 43.5psi when advertising our injectors for sale.