0

525cc FIC Nissan 350Z/370Z Fuel Injector Clinic Injector Set (High-Z)

  • Availability: In Stock
  • Product Code: IS186-0525H
  • Product viewed: 5713

  • $515.00


Available Options
Nissan 350Z/370Z with VQ35/37 engine Top-feed Fuel Injector Clinic Injector Set: 6x525cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC6 or add Plug & Play adaptors PADPUtoD6.

Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Fitment Specifications
Bottom O-ring Outer Diameter 14mm
Cylinder Quantity 6
Height 53mm
Impedance High-Z
Plug and Play Adaptor PADPUtoD6
Top O-ring 14mm
Horsepower supported
Engine Aspiration naturally aspirated
Fuel Pressure 43.5
WHP on E85 at 43psi 90%DC NA 353.08
WHP on E85 at 43psi 90%DC Supercharged 320.98
WHP on E85 at 43psi 90%DC Turbo 294.23
WHP on E85 at 58psi 90%DC NA 407.80
WHP on E85 at 58psi 90%DC Supercharged 370.73
WHP on E85 at 58psi 90%DC Turbo 339.84
WHP on Gas at 43psi 90%DC NA 459.00
WHP on Gas at 43psi 90%DC Supercharged 417.27
WHP on Gas at 43psi 90%DC Turbo 382.50
WHP on Gas at 58psi 90%DC NA 530.15
WHP on Gas at 58psi 90%DC Supercharged 481.95
WHP on Gas at 58psi 90%DC Turbo 441.79

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha