0

525cc (50 lbs/hr at 43.5 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for Ford F150 (1985-2003)/Ford Lightning (1993-1995)

  • Availability: In Stock
  • Product Code: IS406-0525H
  • Product viewed: 4410

  • $599.00


Available Options
525cc Ford F150 (85-03)/ Lightning (93-95) FIC's Data Matched high performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty.

Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to around 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Fitment Specifications
Cylinder Quantity 8
Impedance High-Z
Plug and Play Adaptor PADPUtoJ8
Horsepower supported
Engine Aspiration naturally aspirated
Fuel Pressure 43.5
WHP on E85 at 43psi 90%DC NA 470.77
WHP on E85 at 43psi 90%DC Supercharged 427.97
WHP on E85 at 43psi 90%DC Turbo 392.31
WHP on E85 at 58psi 90%DC NA 543.74
WHP on E85 at 58psi 90%DC Supercharged 494.31
WHP on E85 at 58psi 90%DC Turbo 453.12
WHP on Gas at 43psi 90%DC NA 612.00
WHP on Gas at 43psi 90%DC Supercharged 556.36
WHP on Gas at 43psi 90%DC Turbo 510.00
WHP on Gas at 58psi 90%DC NA 706.86
WHP on Gas at 58psi 90%DC Supercharged 642.60
WHP on Gas at 58psi 90%DC Turbo 589.05

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha