0

1200cc Honda/Acura NSX (90-05) Fuel Injector Clinic Injector Set (High-Z)

  • Availability: In Stock
  • Product Code: IS111-1200H
  • Product viewed: 4421

  • $846.00


Available Options
Honda/Acura NSX (90-05) Fuel Injector Clinic Injector Set: 6x1200cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Plugs in to stock harness for (1990-2005 All 3.0L), Includes pigtails PGT JET6 or add Plug & Play adaptors PADPJtoH6(1997-2005 ALL 3.2L)

Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Fitment Specifications
Bottom O-ring Outer Diameter 21mm Square Seal
Cylinder Quantity 6
Height 53mm
Impedance High-Z
Plug and Play Adaptor PADPJtoH6(1997-2005 ALL 3.2L
Top O-ring 11mm
Horsepower supported
Engine Aspiration naturally aspirated
Fuel Pressure 43.5
WHP on E85 at 43psi 90%DC NA 807.03
WHP on E85 at 43psi 90%DC Supercharged 733.67
WHP on E85 at 43psi 90%DC Turbo 672.53
WHP on E85 at 58psi 90%DC NA 932.12
WHP on E85 at 58psi 90%DC Supercharged 847.38
WHP on E85 at 58psi 90%DC Turbo 776.77
WHP on Gas at 43psi 90%DC NA 1049.14
WHP on Gas at 43psi 90%DC Supercharged 953.77
WHP on Gas at 43psi 90%DC Turbo 874.29
WHP on Gas at 58psi 90%DC NA 1211.76
WHP on Gas at 58psi 90%DC Supercharged 1101.60
WHP on Gas at 58psi 90%DC Turbo 1009.80

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha